|
|
|
FILTRATION OBJECTIVE
|
| To provide high
capacity, low cost bag filtration. Cost effective bag filtration units
for solids/liquid separation to 1 micron quality. |
| PRIMARY APPLICATIONS
|
- Oilfield water injection projects
- Refinery tank bottom remediation
- Paint filtration
- Solvent filtration
|
| BENEFITS |
|
FULL ADAPTABILITY
- In-line design with low profile manifold connections
- Full liquid drain capability
- Internal coating for corrosion protection, or construction from
non-corrosive alloys
- Various seal materials available for differing operating conditions
- Hydraulic easy-lift lid available for ease of maintenance
LOW COST FILTRATION
- Minimal supervision and maintenance requirements
|
| TECHNICAL SPECIFICATIONS
|
Maximum Flow Rate: 7.5 m³/min
Filtration Quality: Down to 1 micron
quality
Filtration Media: Polypropylene,
polyester or nylon bag filters
Total Filtration Area: 44.0 sq
ft
|
| OTHER SYSTEM
FEATURES |
- Can be constructed in carbon steel, 304/316 stainless steel,
or other alloys (depending upon application requirements)
- Internal epoxy coatings for any application
- Differential pressure gauge available to monitor filter media
- Inlet/discharge points may be modified for elevation or manifold
adaptations
|
| |
